About

Hello, welcome to your Rumie Tablet!

This user manual will explain everything you need to know about your Rumie Tablet so you can quickly set up your tablet and Deployment Library and begin learning. Please refer to the document Terminology for any unknown terms.

Configuring your Deployment

Once the Deployment Library has been created in the LearnCloud Admin Panel (see LearnCloud Admin Panel User Guide), there are two ways to load the Deployment Library from the LearnCloud Admin Panel to the Rumie Tablets. It can be done through Internet or using the SD cards that are provided along with the Rumie Tablets.

If your Internet connection is weak consider using the SD cards. It might take a significant longer time to load the Deployment Library if the Internet connectivity is poor. If bandwidth is limited consider using the SD card option.

Option 1: Deployment Configuration via Internet

Ensure your Rumie Tablet is powered ON
Navigate to LearnCloud app by select the “LearnCloud” button located at the top of the home screen
In the LearnCloud app swipe to the right on the screen to open the Navigation Drawer
In the Navigation Drawer select “Settings”
In the Settings screen select “Configure Deployment”
On the Configure Deployment page, select “Add deployment from Internet”
In the pop-up box enter the Deployment ID and Deployment Key that was provided to the Tablet Admin through email
Select the “Add” button to load the Deployment Library to the Rumie Tablet
In the Configure Deployment screen tap the back arrow (<-) located in the top left corner of the Rumie Tablet
In the Settings screen tap the back arrow once again
Tap the “Login” button located in the center of the screen
Login as Tablet Admin with the credentials provided *See page 6 for further instructions on how to login
In LearnCloud app swipe right to open the Navigation Drawer. Tap on “My Libraries” ->Tap the checkbox next to the Deployment Library -> and Tap the “Sync from Internet” button
Once the Deployment Library is loaded tap the back arrow (<-) to go back to My Collections screen
Ensure that all the Collections and Content have been successfully loaded
Logout of the Tablet Admin account through the Navigation Drawer
Sign In as a Student to ensure student accounts are working. *See page 7 for further instructions on how to login

Option 2: Deployment Configuration via SD card

Open the LearnCloud website on a computer and login
Navigate to the Deployment Library by clicking the dropdown arrow next to your profile picture and select Deployment Libraries
Click the “Generate” button to create a downloadable file of the Deployment Library

Image of inside the Deployment Libraries page that located in the LearnCloud Admin Panel. The Deployment Libraries page is where to go to “Manage” and “Generate” your Deployment Library.
Once the Deployment Library has been generated click the “Download Now” button and wait for your Deployment Library to download to your local storage
Once the download is complete follow the steps below in the *Operating Systems Chart based on what type of operating system is being used on your computer
Insert the SD card into an SD card adapter
Insert the SD card adapter into the computer
Drag the unzipped Rumie folder onto the SD card
Once the files have been transferred to the SD card it can safely be removed from the SD card adapter
Turn on the Rumie Tablet
Insert SD card into the Rumie Tablet (Note: The SD card slot is located on the back of the Rumie Tablet at the top. Depending on your model of Rumie Tablet you may need to remove the top portion of the case to access it)
Once SD card is inserted the Deployment Library will be loaded onto the Rumie Tablet
Login as the Tablet Admin with the credentials provided
In LearnCloud app swipe to the right to open the Navigation Drawer. Tap on “My Libraries” -> Tap the checkbox next to the Deployment Library -> and Tap the “Sync from SD Card” button
Once the Deployment Library is loaded tap the back arrow (<-) to go back to My Collections screen
Ensure that all the Collections and Content have been successfully loaded
Logout of the Tablet Admin account through the Navigation Drawer
Sign In as a Student to ensure student accounts are functioning

*Operating System Chart

Windows Computer	Mac Computer
Right click on the zipped file Select "Extract All..." Click the "Extract" button	Double click on the zipped file to extract it

Content Interactivity

PDFs

Swipe left and right to turn the pages. Pinch open with both fingers to zoom in and pinch closed to zoom out

To edit a PDF: Tap the screen to display the toolbar at the top -> select the tool to use
To add a bookmark, show bookmarks, or print: Tap the three dots in the top right hand corner -> select an option

Videos

Tap anywhere on the screen to make the video controls appear. These controls will let you pause, fast forward, rewind, and go back to the previous screen

Apps

There are Android Applications that can be included within your Deployment Library
These are some standard learning apps for the Tablet Admin and Students to access
The Tablet Admin will see a few more apps then the Student, including the Rumie Tablet Settings, if the Deployment Library was created with Content Lockdown on

This ensures that the Tablet Admin can access everything on the Rumie Tablet and the Students can only access approved Content on the device

Admin Usage

This section will provide the steps necessary to perform core functions as a Tablet Admin user.

Usage	Description
Updating Content	When a change has been made to the Deployment Library on the LearnCloud website, the Deployment Library on the Rumie app will need to be updated as well. Updating the Content on Rumie app can be achieved through four methods: SD cards, Internet Sync, Mesh Sync, or LAN Sync.
Updating Content with SD cards	In the Rumie app login as Tablet Admin or as Student Navigate to “Settings” -> ”Configure Deployment” -> “Sync from SD card” Each Rumie Tablet will manually have to be synced from the SD card
Updating Content with Internet Sync	In the Rumie app login as the Admin or as a Student Navigate to “Settings” -> “Configure Deployment” -> “Sync from Internet”
Adding New User Profiles	The Deployment Library comes with pre-configured users. Additional users can be added through the Rumie app: Login as Admin In the Rumie app navigate to “Settings” -> “Configure Deployment” -> “Add a New Student” -> Input the desired new student credentials

Student Usage

Logging In

There can be multiple students logged into the same account on different Rumie app. If the Rumie app is being used on the Rumie tablets, there is access to view analytics of each user. To ensure accurate analytics, each student should have their own account.

Inside the Rumie app select “Student”
Input the student login username and password that has been provided by the Admin

Product Documentation

Rumie App 2.2.2

Table of Contents