Rumie App 3.2
Table of Contents
About
Hello, welcome to your Rumie App!
This user manual will explain everything you need to know about your Rumie App so you can quickly set up your Project Library and begin learning. Please refer to the Terminology document for any unknown terms.
Image of the first page a user will see if a project has not been configured inside of the Rumie App.
Project Setup
Once the Deployment Library has been created in the LearnCloud Admin Panel (see LearnCloud User Guide), there are two ways to load the Deployment Library from the LearnCloud Admin Panel to the Rumie App. It can be done through Internet or using the SD cards that are provided along with the Rumie Tablets. The Project Setup must be done by the Admin of the Project.
If your Internet bandwidth is limited or your connection is weak consider using the SD cards. It might take a significantly longer time to load the Deployment Library if the Internet connectivity is poor.
Option 1: Project Configuration via the Internet
- Ensure you are connected to Wifi
- Inside the Rumie App click on "Configure Project"
- Click on "Add From Internet"
- Enter in the Project ID and Key that has been provided to you by the Rumie team
- Sign In with Admin credentials that have been provided to you by the Rumie team
- Select one or many Libraries that you would like to sync by tapping on the down arrow under Status
Image of the Available Libraries located in the Configure Projects page - Select the Method to sync the library(s) to the device
Image of the sync Methods located in the Configure Projects page - The Download Options are preselected for you depending on how the project was loaded. However, you can toggle different options depending on your needs. See Download Options below for details about each option
- Click "Sync"
- A notification will appear "Are you sure that you want to download [Project Name] Library?" Select Accept
- Once the sync is complete you can begin using your library
Option 2: Project Configuration via Micro SD card
- Open the LearnCloud website and log in
- Navigate to the Deployment Library by clicking the drop-down arrow next to your profile picture and select Deployment Libraries
- Click the “Generate” button to create a downloadable file of the Deployment Library
Image of inside the Deployment Libraries page that located in the LearnCloud Admin Panel. The Deployment Libraries page is where to go to “Manage” and “Generate” your Deployment Library
- Once the Deployment Library has been generated click the “Download Now” button and wait for your Deployment Library to download to your local storage
- Once the download is complete follow the steps in the *Operating System Chart located below based on what type of operating system is being used on your computer
- Insert the SD card into an SD card adapter
- Insert the SD card adapter into the computer
- Drag the unzipped Rumie folder onto the SD card
- Once the files have been transferred to the SD card it can safely be removed from the SD card adapter
- Insert SD card into the Rumie Tablet (Note: The SD card slot is located on the back of the Rumie Tablet at the top)
- Click “Configure Project”
- The Deployment Library will begin syncing to the device
- Sign In as a Learner or Admin to begin using your library
*Operating System Chart
Windows Computer | Mac Computer |
---|---|
|
|
Configure Projects Download Options
Copy Content to Internal Storage
- When syncing from SD card, copy content to internal storage so it can be used.
- This will copy the content from the SD card to the internal storage of your device so it can be used even when the SD card has been removed.
Download and Sync over Wi-Fi only
- Do not download or sync on a mobile data connection, only Wi-Fi.
- This option will ensure that data from your mobile device is not used to download the project onto your device.
Download to External Storage
- Store data in SD card if available.
- This is a good option if the devices internal storage is already maximized and you need extra room.
- If the SD card is removed, the data that is stored on it will be removed with it.
Project Updates
Project Updates can be done by both the Learner or Admin on the device. The updates to the Content and Collections will enable users to have fresh learning material. The Project is initially updated on the LearnCloud where the new Content and Collections can be added.
Option 1: Project Update via Internet
- Ensure you are connected to Wifi
- Inside the Rumie App login as an Admin or Learner
- Click on the Navigation Drawer. The Navigation Drawer can be accessed inside the Rumie App in the top left-hand corner
- In the Navigation Drawer select "Settings"
- In the Settings screen select “Configure and Sync project”
- Select the Libraries to be updated
- Select the "Internet" method
- Click "Sync"
- To ensure the Collections and Content have been successfully updated navigate back to My Collections by clicking the top left back arrow twice
Option 2: Project Update via micro SD card
- Open the LearnCloud website and log in
- Navigate to the Deployment Library by clicking the drop-down arrow next to your profile picture and select Deployment Libraries
- Click the “Generate” button to create a downloadable file of the Deployment Library
Image of inside the Deployment Libraries page that located in the LearnCloud Admin Panel. The Deployment Libraries page is where to go to “Manage” and “Generate” your Deployment Library. - Once the Deployment Library has been generated click the “Download Now” button and wait for your Deployment Library to download to your local storage
- Once the download is complete follow the steps in the *Operating System Chart located below
- Insert the SD card into an SD card adapter
- Insert the SD card adapter into the computer
- Delete the Rumie folder inside the SD card. This is because you will be replacing the updated Rumie folder in the SD card
- Drag the unzipped updated Rumie folder onto the SD card
- Once the files have been transferred to the SD card it can safely be removed from the SD card adapter
- Insert SD card into the Rumie Tablet or mobile Android device (Note: The SD card slot is located on the back of the Rumie Tablet at the top)
- Inside the Rumie App login as an Admin or Learner
- Click on the Navigation Drawer. The Navigation Drawer can be accessed inside the Rumie App in the top left hand corner
- Click "Settings"
- Click “Configure Project”
- Select the Libraries to be updated
- Select the "SD card" method
- Click "Sync"
- To ensure the Collections and Content have been successfully updated navigate back to My Collections by clicking the top left back arrow twice
*Operating System Chart
Windows Computer | Mac Computer |
---|---|
|
|
Option 3: Project Update via Rumie Local Sync
Rumie offers options to sync updated content onto the Rumie App in an offline environment through LAN and Mesh sync. This solution prevents using up bandwidth while enabling content to still be updated on the Rumie App.
Syncing a Project through Mesh or LAN Sync will require at least one tablet to have the most up-to-date content on it (see Option 1 and Option 2 to achieve this). The more up-to-date tablets you have to begin with, the faster the sync will complete. If you have connected to Mesh sync, ensure you disconnect from it before connecting to LAN sync.
LAN Sync | Mesh Sync |
---|---|
There is a 1:1 ratio of devices that need to be updated vs already updated devices. The more devices that are updated, the quicker the sync will become. Please see below for LAN sync recommendations before you begin
| Up to 5 Android devices (or Rumie tablets) can be synced at once through Mesh Sync (at least one up-to-date device and 4 devices that need to be synced). Please note, if more than 5 devices are to be synced through Mesh at once, you may experience connectivity issues due to the network. Mesh sync is supported on Rumie Tablets and mobile devices that support WiFi Direct™. For further information on WiFi direct: Discover WiFi Direct
|
Recommendations for LAN sync before you begin:
Project library size/ content size to be synced: | Up to 4GB |
---|---|
Number of devices to be synced: | Up to 20 (19 to be synced and at least one tablet up-to-date) |
Router speed: | 600 Mbps (2.5 GHz) + 1300 Mbps (5GHz) |
Suggested router brand: | D-Link AC1900 High Power Wi-Fi Gigabit Router |
Battery on devices: | Try to have at least 50% battery before beginning a sync and/or have the devices plugged in to ensure the battery does not die mid-sync. |
Content Interactivity
PDFs
- Swipe left and right to turn the pages. Pinch open with both fingers to zoom in and pinch closed to zoom out
- To edit a PDF: Tap the screen to display the toolbar at the top -> select the tool to use
- To add a bookmark, show bookmarks, or print: Tap the three dots in the top right hand corner -> select an option
Videos
- Tap anywhere on the screen to make the video controls appear. These controls will let you pause, fast forward, rewind, and go back to the previous screen
Apps
If the apps are being accessed on Rumie Tablet, the Admin will see a few more apps than the Learner, including the Rumie Tablet Settings, if the Deployment Library was created with Content Lockdown on. This ensures that the Admin can access everything on the Rumie Tablet and the Learners can only access approved Content on the device.
Admin Usage
This section will provide the steps necessary to perform core functions as a Rumie App Admin user.
Usage | Description |
---|---|
Adding New Learner ProfilesDeleting New Learner Profiles | The Project comes with pre-configured users. Additional users can be added through the Rumie App:
The Admin cannot delete a learner from the Rumie App Admin can only stop learners from accessing the Rumie App. This can be done by changing the learners password and not providing it to the specific learner
|
Logging In as Admin or Learner
There can be multiple Admins or Learners logged into the same account on different Rumie Apps. If the Rumie App is being used on the Rumie tablets, there is access to view the analytics of each user. To ensure accurate analytics, each Admin and Learner should have their own account.
- Inside the Rumie App select “Learner”
- Input the learner login username and password that has been provided by the Admin
Troubleshooting
Reinstalling an app that was deleted
As an Admin it is possible to delete apps on the home screen under the Apps tab. This is done by long pressing the app and a notification will appear "Uninstall application?" if the Admin clicks on YES the app will be removed from the Apps screen. This doesn't mean the app has been permanently deleted off the tablet or from the Collection is was part of. The app will still exist in the Collection. To re-download the app that was deleted from the Apps screen please follow the steps below.
- Navigate into the Rumie App
- Login as Admin
- Navigate to the Collection where the app was located
- Since the app was removed it should have a green android robot next to it
- Click on the app
- A notification will appear "Do you want to install this application? It does not require any special access."
- Click INSTALL
- After the installation is complete click OPEN to begin using the app
- The app will now re-appear in the home screen under the Apps page
Mesh Sync
Issue | Solution |
---|---|
“You are currently connected to Wifi network. Please use LAN sync to update via this network, or select “Forget Network” from Wifi settings to use Mesh Sync.” |
|
Android Devices are not connecting to Group Owner | If you are having trouble connecting an android device to the Group Owner, try connecting it to Group Owner this time through selecting the Group Owner ID on the android device that is to be updated. If an android device is still not connecting, there might be a poor network connection. Try syncing with fewer devices. |
Android Device List Disappearing | After a period of time, the device list will disappear. If this happens to you, click "Refresh device list" to retrieve the device list again. This may take a few seconds. If it is still not refreshing, try exiting out of the Mesh sync page and then reloading it. |
Android Device Status | When a tablet is connecting to the Group Owner tablet, its status will take a few seconds to change from "not connected" to "connected". During this time, please be patient and wait for the status to change to connected. |
"Mesh Sync is complete 0 Content(s) updated." | The tablet is already up-to-date with the most recent content. |
Android devices that are not Rumie tablets are showing up in the available devices list | This will happen because the network is searching for all Android devices. However, they will not start syncing with the content or interfere in the sync. |
Mesh sync did not sync all content | If the Mesh sync did not sync all of your content try going through Mesh sync again with the android device that did not receive all of the new content. |
Mobile Android Devices are not connecting to the Mesh Network | Mesh sync is supported on Rumie Tablets and mobile devices that support WiFi Direct™. For further information on WiFi direct: Discover WiFi Direct. |
LAN sync
Issue | Solution |
---|---|
Android device is syncing wrong project/content | If devices that have different content on them are connected to the same router, disconnect the device that you do not want to sync from the router. You can reconnect all devices to the router once the sync is complete. |
No Wifi connected |
|
"Syncing Searching for update" | The android device is searching for an update and will begin syncing when there is room on the server for it. |
"LAN: Sync is complete No new update was found" | The android device is already up-to-date with the most recent content. Ensure you have selected all of the libraries you would like to be updated during the sync. |
The Rumie Initiative