Rumie App 4.4
About
Hello, welcome to your Rumie App!
This user manual will explain everything you need to know about your Rumie App so you can quickly set up your Project Library and begin learning. Please refer to the Terminology document for any unknown terms.
Image of the first page a user will see if a project has not been configured inside of the Rumie App.
A few new enhancements have been introduced to the Rumie App in 4.2. The main Login page will default to Learner account login and will lists the Learner usernames when signing in, removing the toggle between both "Learner" and "Admin" options. Similarly, by clicking on the “Admin” button will take you to the Admin Login page where all the Admin username will be listed. For both cases, Learner and Admin, you will just need to select your username and hit “Continue”
Gif of the Login page a Learner user and Admin user when you want to login to the Rumie App.
Depending on the configuration of the Project settings, if the Manager has enabled or disable the toggle of requiring learner passwords to Login into the Rumie App, from within RMC. Through this toggle, Learners will not need to input passwords during the Rumie App login process. Including this, the Login duration can be set for each Learner and after the duration is complete, the Learner will automatically be logged out, and they will be promoted to log in again. The Admin will always require to Login. You will have to select your username depending on what your user role is and hot continue to proceed the login process.
Project Configuration
Once your project has been created in the LearnCloud Admin Panel (see LearnCloud User Guide), there are two ways to load the Deployment Library from the LearnCloud Admin Panel to the Rumie App. It can be done through the Internet or using the SD cards that are provided along with the Rumie Tablets. The Project Setup must be done by the Admin of the Project.
If your Internet bandwidth is limited or your connection is weak consider using SD cards. It might take a significantly longer time to load the project if Internet connectivity is poor.
Image of the Device Sync Page in the Rumie App
Option 1: Project Configuration Automatically | Option 2: Project Configuration Manually | Option 3: Project Configuration using QR Code |
---|---|---|
Automatically perform sync - This can be performed when "Enable automatic Internet (Wi-Fi)" has been toggled ON on your Rumie Tablet or device and the Auto-Sync is enabled in the Project Device Settings in Rumie Management Center. Automatic sync will be initiated and your Project will be successfully synced to your Rumie Tablet or device. within the next 60 minutes. Before the sync takes place, you will need to ensure that your Rumie Tablet or device is connected to Wi-Fi and has enough battery. If the battery level is below 50% plug-in your Tablet or device to a power source. | Manually perform sync - This can be performed in three different scenarios, as follows:
| Manually perform sync - This can be performed only when you’re configuring your Project for the first time.
|
Project Configuration - QR Code
Option : Project Configuration via Internet/ Wi-Fi Connection |
---|
|
Project Configuration - Manually
Option 1: Project Configuration via Internet/ Wi-Fi Connection | Option 2: Project Configuration via SD card |
---|---|
| When there is no Wi-Fi Internet connection available you can sync by SD card
|
*Operating System Chart
Windows Computer | Mac Computer |
---|---|
|
|
You can also refer to this document - Device Sync Process - Guide for RMC to know more about the Project Configuration methods and learn why which method is the recommended way by Rumie to configure your Projects successfully.
Viewing Collections
In the Rumie app, we have made improvements by offering "My Libraries" as a new option in the Lesson Path. "My Collections" has been removed from the menu. Users can now view collections at a library level. Initially, if all or multiple selected libraries were synced, all collections were aggregated under one single collections view. Now every library will have its own view which makes viewing and accessing content more effective. Users can toggle between the different libraries they have synced from their project and can view the collections from a single library at a single time.
Select “My Libraries” to view your active Libraries in your Project
Once you see the Library view you can select the Library you want to view the collections for and select “Continue”
Gif of the Library view to access Collections uniquely from active Libraries in your Project in the Rumie App.
Project Updates
Project Updates can be done by both the Learner or Admin on the device. The updates to the Content and Collections will enable users to have fresh learning material. The Project is initially updated on the LearnCloud where the new Content and Collections can be added.
Option 1: Project Update via Internet
Ensure you are connected to Wifi
Inside the Rumie App login as an Admin or Learner
Click on the Navigation Drawer. The Navigation Drawer can be accessed inside the Rumie App in the top left-hand corner
In the Navigation Drawer select "Settings"
In the Settings screen select “Sync project”
Select “Sync by Internet (WiFi)
Click "Yes, Sync Now"
Option 2: Project Update via micro SD card
When your Project Configuration is complete, you have to perform a sync using RMC
When Project is OFFLINE when you select the "Proceed to Sync" button, your Project will be generated for you to download as a .zip file. You will get a pop-up stating the Project Sync completion and once it is complete you will be able to download your Project .zip file.
Please refer to the Project Sync Process in RMC to see how to generate your Project
Once the file has been generated, you will see the message "Project generation is complete! Please download the zipfile below and extract its contents onto an SD card". Select "Download Zipfile".
The zip file that you will download will be called RumieData_ProjectABC_XYZ.zip where ABC represents your Project ID.
This will contain the folder RumieData_ProjectABC which you will have to extract.
Once the download is complete follow the steps in the *Operating System Chart located below.
Insert the SD card into an SD card adapter.
Insert the SD card adapter into the computer.
Delete the Rumie folder SD card, if it already contains one. you will be replacing this folder with the updated Rumie folder on the SD card. If there is no current Rumie folder on the SD card, ignore this step.
Drag the unzipped updated Rumie folder onto the SD card.
Once the files have been transferred to the SD card it can safely be removed from the SD card adapter.
Insert the SD card into the Rumie Tablet or mobile Android device (Note: The SD card slot is located on the back of the Rumie Tablet at the top).
Login to the Rumie App login as an Admin.
Select Sync By SD Card
Content Interactivity
PDFs
Swipe left and right to turn the pages. Pinch open with both fingers to zoom in and pinch closed to zoom out
To edit a PDF: Tap the screen to display the toolbar at the top -> select the tool to use
To add a bookmark, show bookmarks, or print: Tap the three dots in the top right-hand corner -> select an option
Videos
Tap anywhere on the screen to make the video controls appear. These controls will let you pause, fast forward, rewind, and go back to the previous screen
Apps
If the apps are being accessed on Rumie Tablet, the Admin will see a few more apps than the Learner, including the Rumie Tablet Settings, if the Deployment Library was created with Content Lockdown on. This ensures that the Admin can access everything on the Rumie Tablet and the Learners can only access approved Content on the device.
Admin Usage
This section will provide the steps necessary to perform core functions as a Rumie App Admin user.
Sync the Project Successfully using Internet or Wi-fi
Adding New Learner Profiles
Can access any apps and settings of the Tablet
Logging In as Admin or Learner
There can be multiple Admins or Learners logged into the same account on different Rumie Apps. If the Rumie App is being used on the Rumie tablets, there is access to view the analytics of each user. To ensure accurate analytics, each Admin and Learner should have their own account.
Inside the Rumie App select “Learner”
Input the learner login username and password *if the password is required
Language Used Within Rumie App
The Language used within the Rumie App can be overridden from the Project language selection, within the Rumie App - Settings.
Select Language and then a list of languages will appear → System Language, Arabic, English, Farsi and Spanish
If your Android device System Language is not supported by Rumie, it will default to English
Troubleshooting
Reinstalling an app that was deleted
As an Admin it is possible to delete apps on the home screen under the Apps tab. This is done by long-pressing the app and a notification will appear "Uninstall application?" if the Admin clicks on YES the app will be removed from the Apps screen. This doesn't mean the app has been permanently deleted off the tablet or from the Collection is was part of. The app will still exist in the Collection. To re-download the app that was deleted from the Apps screen please follow the steps below.
Navigate into the Rumie App
Login as Admin
Navigate to the Collection where the app was located
Since the app was removed it should have a green android robot next to it
Click on the app
A notification will appear "Do you want to install this application? It does not require any special access."
Click INSTALL
After the installation is complete click OPEN to begin using the app
The app will now re-appear in the home screen under the Apps page
The Rumie Initiative